NRC Fixed Boom
_large.jpg)
Although our range of fixed boom recovery units shares the performance and features of our slider unit they start with a lighter unit model, the 9515. There are four crane models in the NRC European range starting with the 9515, 9025 through to the heaviest, the 9035.
As with the slider system, all of these models share the unique features of crane elevation, forward mounted winches and maximum distance between the sheaves head and the winch mountings enabling the most efficient winch cable management. The 9515 model is suitable for installation to 15,000 kg GVW chassis upwards, whilst retaining all the unique features available on an NRC Slider but being more competitively priced. These non slider models have hydraulic rear stabilisers, a wide choice of underlifts, locker systems to suit your individual chassis and operational requirements with stylish flyers, paintwork and graphics. The NRC Fixed Boom can become the most powerful unit in your fleet for its size and it will also be an asset to have as part of your portfolio.
Starting with the 9515, the lightest in the model range, which is ideally suited for chassis from 15 to 18,000 kgs, this model can deal with cars and light commercials and can be specified to have underlift performance to recover casualties up to 18,000 kgs GWV trucks, tractor units and city buses. The compact size allows the operator to maximise the use of the vehicle applying it to cars and commercials without the need for two individual medium size recovery units.
Moving up the range to the more powerful 9025 and 9035, these systems have the capacity to recover broken down trucks and buses or vehicles of similar size and weight involved in major accidents. By utilising all the features on these powerful units there is no job too large that cannot be tackled with conviction as this system has all the features of dual winches, crane boom, power tilt hydraulic stabilisers, accessories and attachments to complete any recovery from car to heavy commercial with confidence, speed and efficiency.
Model Range
There are three recovery cranes in the range
- NRC 9515
- NRC 9025
- NRC 9035
There are six under lift models in the range:
- NRC Medium Duty
- NRC Super Medium Duty
- NRC Heavy Duty
- NRC Super Heavy Duty
- Dyson Maxi Reach
- Dyson Low Line
Crane Capacity and Reach
| Crane Models | 9515 | 9025 | 9035 |
|---|---|---|---|
| Boom Reach | 17' 8" 5.38 mtrs |
22' 9" 6.93 mtrs |
24' 10" 7.57 mtrs |
| Boom Capacity | 10,000 kgs | 16,700 kgs | 24,000 kgs |
| 2nd Boom Capacity | 2,400 kgs | 6,000 kgs | 10,000 kgs |
| Main Winch Capacity | 12,000 lbs 5,454 kgs |
25,000 lbs 11,364 kgs |
35,000 lbs 15,909 kgs |
| 2nd Winch Capacity | N/A | N/A | N/A |
| Main Cable Length/Diameter | ½ x 100 13mm x 30.5 mtrs |
⅝ x 200 16mm x 61 mtrs |
¾ x 200 19 mm x 61 mtrs |
| NRC Heavy Duty Underlift | N/A |  |
|
| NRC Medium Heavy Duty Underlift | |
N/A | N/A |
| NRC Super Medium Heavy Duty Underlift | |
|
N/A |
| NRC Super Heavy Duty Underlift | N/A | N/A | |
| Dyson Maxi Reach Underlift | N/A | N/A | |
| Dyson Low Line Underlift | N/A | |
|
Underlift Capacity and Reach
| Underlift Models | Closed | Capacity | Extended | Capacity |
|---|---|---|---|---|
| NRC Medium Duty | 64" (1.63 mtrs) |
5,000 kgs | 98" (2.50 mtrs) |
2,500 kgs |
| NRC Super Medium Duty |
70" (1.78 mtrs) |
8,500 kgs | 108" (2.74 mtrs) |
4,000 kgs |
| NRC Heavy Duty | 73" (1.85mtrs) |
12,500 kgs | 111" (2.85mtrs) |
5,000 kgs |
| NRC Super Heavy Duty |
86" (2.18 mtrs) |
16,000 kgs | 136" (3.45mtrs) |
6,000 kgs |
| Dyson Maxi Reach | 72" (1.83 mtrs) |
21,000 kgs | 165" (4.2 mtrs) |
8,000 kgs |
| Dyson Low Line | 59" (1.51mtrs) |
16,000 kgs | 138" (3.5 mtrs) |
8,000 kgs |
Equipment features:
- Locker storage tailored to suit your equipment model
- On site paint and graphics to your fleet colours
- Boom elevation and operational area 0° to 55°
- Gear PTO giving full hydraulic operation
- All models fully hydraulic operation
- Pneumatic winch free spool facility
- V shaped recovery boom design
- 360° winch rope sheath heads
- Winch rope cable tensioners
- Manual rear control stations
- Control station illumination
- Stylish body flyer systems
- Nilatron boom slide pads
- Rear winching stabiliser
- Rear mounted D rings
- Winch up back points
Options available:
- Extensive range of safety lighting equipment
- Wide range of work area lighting systems
- Wide choice of lifting forks and adaptors
- Full range of ancillary equipment
- Manual, cable or radio controls
- Optional stabiliser
- 5 wheel grid models
